VACUUM MICRO-PRESSURE FORMING MACHINEFSP-800A, 1000A TYPE
Various data can be input and displayed via the LCD touch panel. Forming table drive uses linear motion drive system via servomotor and ball screw.
- Materials
- PSP
- PP
- HIPS
- PVC
- A-PET etc.
Features
- Various data can be input and displayed via the LCD touch panel.
- Forming table drive uses linear motion drive system via servomotor and ball screw.
Standard Specifications
FSP-800A, 1000A TYPE
| Raw film materials | PSP, PP, HIPS, PVC, A-PET etc. |
|---|---|
| Forming area | MAX 1000mm(W) × 1100mm(F) |
| MIN 700mm(W) × 700mm(F) | |
| Maximum height of forming products | 120mm |
| Table vertical drive | AC servomotor drive |
| Table movement stroke | Upper 200mm |
| Lower 290mm | |
| Open and shut height | Upper 150～350mm |
| Lower 150～440mm | |
| Sheet feed | AC servomotor feed |
| Needle-attached special chain feed mechanism | |
| Sheet feed speed | 1400mm/sec |
| Heater | Medium-wave infrared radiator heater |
| Heater capacity | Upper 63kw |
| Lower 50kw |
VACUUM MICRO-PRESSURE FORMING MACHINEFSP-800A, 1000A TYPE