TEST-USE ULTRA-COMPACT VACUUM PRESSURE FORMING MACHINEFVS-500 TYPE
Ultra-compact vacuum pressure forming machine developed specifically for test forming. Allows high-speed forming and memory recall of forming conditions. Operates using cut sheets.
Features
- Ultra-compact vacuum pressure forming machine, developed for test forming use. Forms using cut sheets.
- Vertical movement of the mold and left-right movement of the sheet are driven by servomotor, and the sheet returns to the forming zone at high speed after heating is complete. Forming operations can also be performed at high speed.
- Forming conditions such as the mold stopping position, movement speed, heater and timer conditions can be set by entering values via the touch panel. Values can also be stored and recalled.
Roll Sheet Cutting Device
- Performs slitting across sheet width at the same time as cutting sheet length.
Main Specifications
FVS-500 TYPE Main Specifications
| Forming Area | Maximum 500mm(L) × 500mm(W) |
|---|---|
| Forming product hight | Maximum 100mm |
| Forming pressure | 5,000Kg/f |
| Forming space | 1,950mm × 950mm × 2100mm |
| Machine weight | 1.8t (including attached vacuum pump) |
| Power supply | AC 3-phase, 200V, 50/60Hz, Total capacity 28.0kW |
| Operating air | 100ℓ/min (5kg/㎠ or more) |
Roll Sheet Cutting Device Main Specifications
| Maximum raw material width | 1,050mm |
|---|---|
| Widthwise slitting | Bisection slits, or Trisection slits |
| Sheet feed | Manual handle operation |
| Lengthwise cutting | Cutter travel via cylinder |
| Machine weight | 0.3t |
| Power supply | AC single phase, 100V, 50/60Hz, Total capacity 0.35kW |
| Operating air | 100ℓ/min (5kg/㎠ or more) |
External Drawing
TEST-USE ULTRA-COMPACT VACUUM PRESSURE FORMING MACHINEFVS-500 TYPE