
VACUUM FORMING MACHINEWFS-800, 1000 TYPE
WAKITEC's standard vacuum forming machine, this model prioritizes advanced energy-saving and thermal efficiency. Central forming method allows stable precision, and simple setup is radically time-saving.
Features
OUTSTANDING ENERGY-SAVING AND THERMAL EFFICIENCY
- Use of a medium-wave infrared radiator enables heat treatment to spread uniformly throughout the sheet. High quick-response performance also speeds up start-up and heater adjustment, reflected in the resulting products.
- Box-type heater minimizes heat loss, achieving outstanding heat efficiency.
HIGH-PRECISION FORMING MECHANISM
- Central forming method eliminates unbalanced load in mold vertical mechanism, maintaining precision even after long-term use.
- Mold vertical mechanism is driven by servomotor and ball screw. Stopping position and speed are numerically controlled, and setting conditions are stored and recalled accurately.
DRAMATIC REDUCTION IN MOLD CHANGE TIME
- Mold setting device using central forming method achieves accurate reproduction, making mold changing simple.
- Sheet clamp mechanism around the mold can be flexibly set, and requires no replacement.
SPACE-SAVING DESIGN
- Other electrical devices, including the operating panel and control panel are built into the machine, reducing the space required, and allowing smooth changing of molds.

CONTROL PANEL WITH LCD TOUCH-SCREEN
- All settings for mold stopping position, vertical movement speed, timer and temperature conditions can be performed on this control panel.
- Setting conditions are saved within the hardware, eliminating the need for IC card or floppy disc. Storage capacity of 200 types of forming conditions, which can be saved, recalled, and printed out.
OPTIONS
- Round blade traveling shearing machine
- Vacuum pump
Forming zone using central forming method



Standard Specifications
WFS-1000 TYPE
Forming Area | MAX 1000mm(W) × 1100mm(F) |
---|---|
MIN 600mm(W) × 600mm(F) | |
Maximum forming product height | 120mm |
Sheet width | 1050mm(MAX) |
Table Stroke | Upper 220mm(MAX) |
Lower 250mm(MAX) | |
Table Open height | Upper 120~340mm |
Lower 120~370mm | |
Heater | Upper 63KW |
Lower 50KW |
WFS-800 TYPE
Forming Area | MAX 800mm(W) × 900mm(F) |
---|---|
MIN 500mm(W) × 500mm(F) | |
Maximum forming product height | 120mm |
Sheet width | 850mm(MAX) |
Table Stroke | Upper 220mm(MAX) |
Lower 250mm(MAX) | |
Table Open height | Upper 120~340mm |
Lower 120~370mm | |
Heater | Upper 53KW |
Lower 32KW |
External Drawing

VACUUM FORMING MACHINEWFS-800, 1000 TYPE